Douwe Egberts Cafitesse 110, Руководство по обслуживанию

Страница: 33 / 93

August 2009
3 -
Cafitesse 100 Next Generation Errors
No. Description Over-
rules
Set condition Reset condition Remarks Cause Remedy Priority
81 UI error No response or
error reported
Reset on reco-
very
Wiring incorrect or defective
UIB defective
MCB defective
1.
2.
3.
Check and correct wiring
Replace UIB
Replace MCB
1.
2.
3.
82 Payment module
error
No response or
error reported
Lock/clear
button
1)
Payment system enabled, but
not connected.
Wiring incorrect or defective
Coin/card/waiter system not
connected or defective
Power issue in payment sy-
stem
Control board payment system
defective
MCB defective
1.
2.
3.
4.
5.
6.
Check and correct payment
settings
Correct or replace wiring
Check and connect/replace
coin/card/waiter system
Check power unit in payment
system and wiring
Replace control board payment
system
Replace MCB
1.
2.
3.
4.
5.
6.
83 Flavor module
error
No response or
error reported
Lock/clear but-
ton
1)
not active not active
84 Foamino module
error
No response or
error reported
Lock/clear but-
ton
1)
not active not active
85 Cold module
error
No response or
error reported
Lock/clear but-
ton
1)
not active not active
90 Check sum error
parameter
.field 1
Software Lock/clear
button
1)
, after
initialization has
indicated that the
checksum is OK
The memory test of the MCB
detected a memory
failure.
Replace the MCB. 210
91 Check sum error
parameter
.field 2
Software Lock/clear
button
1)
, after
initialization has
indicated that the
checksum is OK
The memory test of the MCB
detected a memory
failure.
Replace the MCB. 210
3.5 Errors hardware and network
1)
Errors are reset by pressing the Lock/clear button in cleaner-, operator-, service- or development mode is shown
2)
Not valid for Cafitesse 100 NG
3)
Valid for Cafitesse 120 NG only