Douwe Egberts Cafitesse 110, Руководство по обслуживанию

Страница: 5 / 93

DRAFT
Installation / Putting into operation Cafitesse 100 Next Generation
August 2009
2 -
Transport due to location change
When you transport a used dispenser to a new
location:
Remove the product pack(s) (BIBs).
Disconnect the mains plug.
Disconnect the dispenser from the water supply.
ATTENTION: Completely drain the water from
the boiler prior to storage and
transport, in order to prevent
damage due to frost. Remove
any residual water from hoses
and valves.
Drain the boiler
WARNING: Hot water!
There is danger of being scal -
ded.
Tilt the dispenser forwards in order to drain the
residual water.
Pack the dispenser in such a manner that a
safe transport is guaranteed. Use the original
packageing if possible (fig. 1, 2).
The dispenser must have been cleaned correctly
before you store it for a longer period of time.
When used dispensers are stored for a long
time,
the inlet valve of the water supply hose
towards the boiler
as well as
the cold water inlet valve (option cold water /
café cool)
and
the respective inlet hoses
must be disconnected in order to ensure that the
hoses are empty. In this way future spoiling fo
the tast is avoided.
WARNING: If there is the danger of
damage due to frost, when the
dispenser is reinstalled after a
longer period of storage, check
and replace boiler, hoses and
valves. Carry out a functional
test.
•
•
•
•
•
•
•
•
-
-
-
Fig. 1
Fig. 2