7.3.3 Lubricate trigger pin.
Personnel:
Operator
+ additional qualification explosion pro-
tection
+ Additional qualification high pressure
Protective equipment:
Safety boots
Fig. 12: Lubricate trigger pin.
1. Wet trigger pin (1) from both sides with a
drop of silicone-free lubricant.
8
Faults
8.1
Safety recommendations
WARNING!
Risk of injury from unsuitable replace-
ment parts in explosive areas.
Replacement parts not compliant with the
specifications of the ATEX guidelines can
cause explosions in an explosive atmos-
phere. Serious injuries and death can be
the consequence.
– Use exclusively original replacement
parts.
CAUTION!
Risk of injury due to spring tension
The end cap of the spray gun is under
spring tension. If you remove the end cap,
the spring tension could cause the end
cap to jump out unexpectedly and cause
light injuries.
– Removing and installing end cap
NOTICE!
Property damage due to improper
replacement of needle and nozzle seal
seat
If you only replace the needle or only the
nozzle seal seat, it could damage spray
gun components. This can compromise
the tightness of the spray gun. The spray
pattern deteriorates.
– Always replace nozzle seal seat and
needle at the same time.
Faults
05/2018
EcoGun AL MAN 300 - MSG00016EN
19/44
