Fig. 7: Guiding the spray gun
2. Guide the spray gun in a straight line at a
90° angle at a constant distance of 25 to
max. 30 cm from the surface to be
painted.
The material can be applied cross-
wise to increase the covering
capacity and coat thickness.
Switching between horizontal and
vertical spraying stripes (Fig. 8)
yields a uniform and closed spray
pattern.
Fig. 8: Apply material
3. Apply material horizontally alternately
from left to right.
4. Apply material alternately vertically from
top to bottom.
5. Release trigger (1, Fig. 6) after ending
the painting process.
6. Continue movement.
The movement must be longer
than the spraying strip.
7. Swivel safety lever (2, Fig. 6) downwards
after the painting process is over.
ð
The spray gun is locked.
6.5
Rinsing
6.5.1 General notes
When rinsing, use fluid to remove inner
soiling from components.
Operation
05/2018
EcoGun AL MAN 300 - MSG00016EN
13/44
