DÖRR EcoGun AL MAN 300, Руководство по эксплуатации

Страница: 4 / 44

1 Product overview
1.1 Overview
Fig. 1: Product overview
1 Spray jet screen
2 Reversible nozzle
3 Cap nut
4 Suspension hook
5 Housing
6 Retainer lever
7 Material connection
8 Paint tube
9 Trigger
1.2 Short description
The spray gun is intended for surface
coating without compressed air. It is suitable
for Airless Applications in the high pressure
area. The material to be atomized is fed
through high pressure lines and atomized
with a pressure of up to 300 bar. The spray
gun is hand-held.
Use a nozzle with a suitable diameter,
depending on the requirement. If there is a
blockage, you can rotate and flush the
nozzle through without disassembly.
The following factors influence the spray jet
and therefore the result
Material pressure
The higher the material pressure, the
higher the material flow and thus the finer
the atomization. The lower the material
pressure, the higher is the efficiency and
the smaller is the overspray generated.
Nozzle
The larger the nozzle, the more material
comes out. The greater the angle, the
wider is the spray pattern.
2 Safety
2.1 Presentation of Notes
The following notes can appear in this
instructions manual.
DANGER!
High risk situation that can lead to serious
injuries or death.
WARNING!
Medium risk situation that can lead to
serious injuries or death.
CAUTION!
Low risk situations that can lead to minor
injuries.
NOTICE!
Situations that can lead to material
damage.
Product overview
05/2018 EcoGun AL MAN 300 - MSG00016EN 4/44