DÖRR EcoGun 116, Руководство по эксплуатации

Страница: 42 / 44

Item Description Material no.
8 Sealing ring
Ø
36.5x
Ø
32.7x1
9 Outer tube
10 Seal Ø 33.7x Ø 30.6x1
11 Inner tube 300 mm M34010602
12 Ball sealer
13 Needle
14 Monkey wrench Ä 11.2 “Tools”
15 Cleaning brush
Assembly instructions
– Disassemble air cap, nozzle and needle.
Ä
8.3.1 “Replace needle and nozzle.”
– Thread the ball sealer (12). Tighten the gun tight using the inner tube (11).
– Push up outer tube (9) with seal (10).
– Thread on and tighten cap nut (7) with sealing ring (8).
– Insert and tighten nozzle (3).
– Insert air cap (2). Tighten cap nut (1).
– Push in needle (13) carefully into the gun housing from the back.
– Insert needle spring, bearing and set screw again.
Ä 8.3.1 “Replace needle and
nozzle.”
– Purge the gun with solvent. Ä 6.7 “Rinsing”
– Set the material flow. Ä 5 “Commissioning”
Nozzle set C for LPS 300 M09800444
Description Item no. Quantity
Baffle 4 1
Air cap 5 1
Insert 6 1
Needle 13 1
Nozzle set R for LPS 300 M09800438
Description Item no. Quantity
Cap nut 1 1
Air cap 2 1
Replacement parts, tools and accessories
05/2018 EcoGun 116 - MSG00017EN 42/44