Additional rinsing intervals depend
on the material used.
Preparation for rinsing
1. Disconnect the air hose from the spray
gun.
Fig. 9: Removing the air cap
2. Loosen cap nut (1).
3. Remove the air cap (1).
Purging
4. Keep collecting tray ready.
Fig. 10: Rinsing spray gun
5. Keep the spray gun slightly at an angle
above the collecting tray, nozzle (3)
pointing towards the ground.
6. Rinse the spray gun with an appropriate
rinsing agent through the material con-
nection (2), until the rinsing agent runs
clean without any material residue. Use a
brush to carefully clean the holes (3) of
the nozzle.
7. Ensure proper disposal of the exiting
material and rinsing agent.
8. Connect the compressed air hose to the
spray gun.
9. Operate trigger lever until no more rinsing
agent flows out.
Final work
10. Place the air cap (1).
11. Tighten cap nut (1).
Operation
05/2018
EcoGun 116 - MSG00017EN
13/44
