NOTICE!
Situations that can lead to material
damage.
ENVIRONMENT!
Situations that can lead to environmental
damage.
Contains additional information and
recommendations.
2.2
Intended Use
The spray gun
Eco
Gun 116 is used exclu-
sively for hand guided spraying coating of
surfaces. Compressed air is used to apply
material.
The material feed is gravity-fed (feed cups).
The use is only permitted in the industrial
area within the specified technical data.
The spray gun is approved for use in explo-
sive areas of Ex zones 1 and 2.
Misuse
There is a risk of death if not used properly.
Misuses include, e. g.:
Aiming the spray gun at humans or ani-
mals.
Atomization of fluid nitrogen
Combination of the spray gun with com-
ponents that are not approved by
Dürr Systems for operation.
Use of unapproved materials, see safety
data sheets
Making conversions or changes on your
own
Use of spray gun in Ex zone 0
EX labeling
II 2G T60°C X
II
- Device group II: all areas except
mining
2G
- Device category 2 for gas
T60 °C - Surface temperature max. 60 °C
X
- Specific operating conditions for
safe operation
The following conditions must be observed
for safe operation:
Ground spray gun and work piece.
Only use conductive air hoses.
Ensure that static electricity can be dis-
charged.
Use exclusively compressed air quick
couplings for water-based materials,
where it is not necessary to keep dis-
charging static electrical charges.
2.3
Residual risks
Explosion
Sparks, open flames and hot surfaces can
cause explosions in explosive atmospheres.
Serious injuries and death can be the conse-
quence.
Before carrying out any work, ensure a
non-explosive atmosphere.
Do not use sources of ignition and open
light.
Do not smoke.
Ground the product.
Ground the work piece.
Only use conductive lines.
Flammable coating materials and their deter-
gents and cleaning agents can cause a fire
or an explosion.
Ensure that the flashpoint of the fluid is at
least 15 K above the ambient tempera-
ture.
Note explosion group of the fluid.
Follow safety data sheets.
Ensure that forced ventilation and fire
protection equipment are in operation.
Do not use any sources of ignition and
open light.
Safety
05/2018
EcoGun 116 - MSG00017EN
5/44
