Saflok RT/RT Plus Installation Guide
PK3720_T 04-19 19
How to change lock cylinders (continued)
33. Re-insert the cylinder plug (C1) (Fig. 21)
Fig. 21
(A1)
(C1)
34. While holding the cylinder (D1) and plug (C1) in place, in-
sert the key (L1) (see Fig. 22)
35. Turn the key (L1) approximately 100º clockwise
36. Repeat the steps 1 to 9 to attach the lever handle (A1) to
the lock housing. (see Fig. 22)
Fig. 22
Right-handed
lock
Left-handed
lock
(A1)
(L1)
CAUTION
WARNING
IMPORTANT
The Key Override itself does not retract the latch or dead-
bolt. Do not use too much force when turning the key as this
may damage the unit. To retract the latch, turn the key clock-
wise until it stops, and turn the lever handle (A1). See page 15
CAUTION
WARNING
IMPORTANT
The lever handle must stay in the horizontal position when
turning the key (do not try to turn the key while turning the
handle) or the override mechanism will not work.
CAUTION
WARNING
IMPORTANT
Always keep the door open while installing and verifying the
functionality of the lock with the keycard or key override.
Do not close the door until you are certain that you have in-
stalled the unit correctly.
4 Installation of Mechanical Override Model
