Operation
Technical Manual
82
04043552 - 07/2017
Terminal 97 00
7.9
BaseApp
The BaseApp is the user interface shown after closing an application.
The BaseApp essentially performs the following functions:
•
Protection of the operating system from unauthorized access (system isolation).
•
Only controlled access to the operating system is possible.
•
Organization and start-up of applications (apps).
•
Provision of functions and interfaces for access to the hardware.
7.9.1
Starting the application
On the start screen of the BaseApp, the applications (apps) available to the user are shown in
the form of symbols (icons).
Depending on the number of applications, this list can run over several pages. The number of
pages is indicated by the dots below the list. The active page is characterized by a filled dot.
Upon touching the corresponding icon, the application is started.
For example, Kaba terminal software:
•
Icon HR30 = B-Client HR30 terminal software
•
Icon TP = Kaba test program
