Commissioning
Technical Manual
73
04043552 - 07/2017
Terminal 97 00
6.9
Remote setup
The following settings can also be transferred to the device via SFTP
[
}
6.8]
:
•
Host configuration
•
FTCS host configuration
•
Reader settings
This type of start-up should only be carried out by experienced system specialists.
Procedure:
1.
Establish SFTP connection to the device.
2.
Load the following file in ASCII mode to the local computer:
/data/data/com.kaba.apps.hr/files/
EEPROMsetting
This file contains the parameter used for the last start.
3.
Rename file to
reboot.cmd
.
4.
Adjust the parameter values in the file accordingly.
NOTE:
Changes in the sections [General] and [Ethernet] will not be applied!
5.
Enter ‘RESET’ in the first line of the file.
Example:
RESET
[Ethernet]
MAC Addr=00:07:cc:00:62:e4
Terminal Addr=10.10.5.85
...
6.
Copy the
reboot.cmd
file to the following directory on the device:
/data/data/com.kaba.apps.hr/files/transfer/
ð
The file will be identified within approx. 15 seconds and the parameter values will be ap-
plied.
ð
The terminal software is then restarted with the changed settings.
