Commissioning
Technical Manual
54
04043552 - 07/2017
Terminal 97 00
6 Commissioning
6.1
Network requirements
Start-up and communication in regular operation are done via an Ethernet network.
To guarantee unhindered and trouble-free data traffic, the UDP ports used for communica-
tion must have been enabled.
The firewall configuration must therefore be adapted accordingly.
6.1.1
Communication
The UDP port used for communication between B-COMM and the terminal must have been
enabled.
The UDP port is in the range from 7700 hex. to 77EF hex. (30464 dec. to 30703 dec.), depend-
ing on configuration.
6.1.2
Comparing finger templates
Devices equipped with a biometric CBM reader require another UDP port for exchanging bio-
metric data.
The UDP port used for the FTCS or BCFTC stream must have been enabled.
The UDP port is in the range from 7800 hex. to 78EF hex. (30720 dec. to 30959 dec.), depend-
ing on configuration.
6.1.3
Automatic registration via B-COMM
The network must have been equipped with a working DHCP server.
It must be possible to transfer UDP data packages unhindered to the B-COMM server.
•
IP address 239.255.255.250, UDP port 1900 dec. and UDP port 7900 (30976 dec.) must
have been enabled.
•
The SSDP service has to be enabled in the Windows service management.
•
The SFTP connection via the standard port 22 must have been enabled.
