Doosan DL200, Руководство по эксплуатации и обслуживанию

Страница: 165 / 256

OP000509
4-21
Inspection, Maintenance and Adjustment
MAINTENANCE INTERVALS
SERVICE ITEM PAGE
10 Hour / Daily Service
Grease Front Attachment Pins (for First 100 Hours) 4-23
Inspect All Tires for Correct Tire Pressure and Signs of Damage or Abnormal Wear 4-23
Check Engine Oil Level 4-23
Check Transmission Oil Level 4-24
Check Hydraulic System Oil Level 4-25
Check for Leaks in Hydraulic System 4-26
Fill Fuel Tank 4-26
Check for Leaks in Fuel System 4-27
Drain Fuel Condensation 4-27
Check Coolant Level 4-27
Check Level of Windshield Washer Liquid 4-28
Inspect the Bucket Teeth and Side Cutters for Signs of Wear 4-28
Inspect Seat Belt for Proper Operation 4-28
Inspect the Structure for Cracks and Faulty Welds 4-28
Check the Operation of All Switches 4-28
Check the Operation of All Exterior Lights, Horn and Control Console Indicator and
Monitor Lights 4-29
Start Engine, Check Starting Ability, and Observe Exhaust Color at Start-up and at
Normal Operating Temperature. Listen for Any Abnormal Sounds 4-29
Check Operation of All Controls 4-29
Inspect Cooling Fan Blade 4-30
Check Engine Drive Belt Wear 4-30
Check Air Intake System 4-31
50 Hour / Weekly Service
Perform All Daily, 10 Hour Service Checks 4-32
Grease Front Attachment Pins 4-32
Grease Steering Cylinder Rod and Head Ends 4-39
Grease Upper and Lower Center Pins 4-39
Replace Engine Oil and Filter (After First 50 Hours) 4-40
Replace Hydraulic Full Flow Filter (After First 50 Hours) 4-40
Check Air Conditioner and Alternator Belt Tension (After First 50 Hours) 4-40
Clean Exterior of Radiator, Oil Cooler and Air Conditioner Condenser 4-41
Clean Air Conditioner Outer Filter 4-41
250 Hour / Monthly Service
Perform All Daily, 10 Hour and 50 Hour Service Checks 4-42
Check Engine Air Intake Precleaner 4-42
Drain Water From Hydraulic Oil Tank 4-42
Turbocharger 4-43
Check Air Conditioner and Alternator Belt Tension 4-43
Grease Drive Shafts 4-44