DoorKing 9150 Series Скачать руководство пользователя страница 46

Страница: 46 / 54

9150-065-Y-12-20

7.3 Accessory Items

UL 325 Monitored Entrapment Protection Devices available for model 9150 slide gate operator.

Type B2 Contact Sensors (Reversing Edge)

DoorKing 8080 Series Sensing Edges

  Miller Edge Sensing Edges - all models with a T2 (resistive) termination.
  Miller Edge wireless monitored transmitter/receiver kit model RB-G-K10
  ASO GMBH Sentir GF Series sensing edges

Type B1 Non-contact Sensors (Photo Cell)

  DoorKing Model 8080-057 Retro-Reflective Photocell
  Miller Edge Reflective-Guard Model RG
  Miller Edge Prime-Guard Model PG
  EMX Industries Model IRB-MON
  EMX Industries Model IRB-RET
  Omron Model E3K-R10K4
  Seco-Larm Model E-936-S45RRGQ
  Seco-Larm Model E-960-D90GQ

Monitored Expansion Kit

Miller Edge Multi-Input Module Model MIM-62

The following accessory items are available for the model 9150 slide gate operator.

Plug-In Loop Detector

- Detectors plug directly into ports on circuit board simplifying wiring.

  Single channel detector - P/N 9410-010
  Dual channel detector - P/N 9409-010
  Single channel detector with aux relay - P/N 9411-010
  Single channel low power draw detector - P/N 9416-010
  Dual channel low power draw detector - P/N 9415-010

External Loop Detector

  Reno A&E 12/24 VDC or 24 VAC - 9402-045
  Reno A&E 120 VAC - 9402-047
  Carlo Gavazzi 24 VAC/VDC - 9402-044
  Diablo 10-30 VAC/VDC low power draw - 9402-050

Loop Wire

- 18 AWG loop wire with XLPE insulation is ideal for ground loops. Available in 500 and 1000 foot rolls. Red, blue or black

insulation.

Pre-Fab Loops

- Prefabricated ground loops. 24-foot circumference with 50-foot lead-in. Available in yellow, red or blue jackets. Not for use in

asphalt roadways.

Loop Test Meter

- Meg-ohm meter checks the integrity of ground loops. P/N 9401-045

Interconnect Cable

- Interconnect wire cable contains all the necessary wires to interconnect primary / secondary operators.

Cable length: 30 ft. - P/N 2600-755 40 ft. - P/N 2600-756 50 ft. - P/N 2600-757

Time Clock

- 7 day time clock can be used to automatically open gate at pre-set time and days. Compact clock fits inside the operator.

7 day clock - P/N 2600-791

V-Wheels

- 4 inch and 6 inch. UHMW or Steel. Roller bearings or sleeve bearings. Single or tandem wheel configurations.

Endless Idler Assembly with Protective Cover

- Use when gate operator chain needs 180° return. P/N 2600-818

Guide Rollers with Protective Covers

- A variety of sizes to support slide gates.

Gate End Retainer

- Fits on top of end post and helps stabilize the end of the gate in the open or closed position (End post NOT provided).

P/N

1204-004

Base Plate for 9150

- Required for post mount installation. P/N 2600-495 (6 x 6 steel posts NOT provided).

Base Plate Stop Brackets for 9150

- Required for post mount installation when using chain stops. P/N 2600-970

Additional #40 Chain

- 20 ft. per box. P/N 2600-442

9150 Fail-Secure Manual Release Kit

- Changes the Fail-Safe manual release to a Fail-Secure manual release. P/N 2600-865

High Voltage Kit

- Alter the input AC voltage on a 115 VAC 9150 to 208, 230, 460 or 575 VAC. P/N 2600-266

115 VAC Heater with Fan Assembly Kit

- Thermostatically controlled heater and fan for cold environment.

For 115 VAC input power ONLY. P/N 1601-154

208/230 VAC Heater with Fan Assembly Kit

- Thermostatically controlled heater and fan for cold environment.

For 208/230 VAC input power ONLY. P/N 1601-197

460 VAC Heater with Fan Assembly Kit

- Thermostatically controlled heater and fan for cold environment.

For 460 VAC input power ONLY. P/N 1601-198

Surge Devices

- High and low voltage surge suppressors help prevent circuit board failure caused by lightning strikes and power surges.

High Voltage - P/N 1879-080 Low Voltage - P/N 1878-010

Speed Bumps

- Prefabricated six-foot speed bump reduces traffic speed through gate system. P/N 1610-150

Содержание 9150 Series























































Результаты поиска

Содержание 9150 Series

Отзывы:

Похожие инструкции для 9150 Series

Бренды по названию

Популярные бренды

DoorKing 9150 Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 9150 Series

Отзывы:

Похожие инструкции для 9150 Series

Бренды по названию

Популярные бренды