EN
50
BIOCLASS iC 66
13
TECHNICAL MENU
"Technical Menu" consists of a number of technical operating parameters that only have to be modified
by a person with sufficient technical knowledge of the meaning of each parameter. Any inappropriate
setting of a parameter of “Technical Menu” can cause a serious malfunctioning of the boiler and could
cause damages to people, animals or things.
To access the
"
Technical Menu
"
press MENU and RESET tactile buttons together for 5 seconds. Access
code ("cod") request will be displayed (see "Entry and set the access code"). After entering the correct
code, the first parameter of "Technical menu" will be displayed. Browse through the menu (
P.01, ...,
P.53
) by pressing the symbols "+" or "-" of heating
(18).
When the desired parameter is displayed, press
to access and set it by pressing the symbols "+" or "-" of DHW
(19)
. When the parameter has been
set, press
again, the value will be saved and the display will return to “Technical menu”. Press RESET
any time to go back without recording any value. The following table lists these parameters and they are
described in detail in the following sections of the manual:
Nº
Parameter
Display
Cod
Access code
(by default 1234)
P.01
Boiler model
P.02
Minimum boiler heat output (%)
P.03
Maximum boiler heat output (%)
P.04
General fan speed factor (%)
(Visible only with C.01 = 0 or C.01 = 1)
P.05
Fuel for ignition (g)
P.06
Fuel consumption (kg/h)
Содержание BioClass iC 66
Страница 1: ...Bioclass iC 66 Biomass boiler EN INSTALLATION AND OPERATING INSTRUCTIONS ...
Страница 2: ......