DOMUSA TEKNIK BioClass iC 66, Инструкция по установке и эксплуатации

Страница: 43 / 80

43 BIOCLASS iC 66
11.2 Heating time schedules
These schedules are only displayed for the zones if there is a room
sensor connected in the corresponding heating circuit. Use this process
to adjust the "Comfort" and "Reduced" heating periods you want for
each heating zone installed in the boiler (
). To deactivate the time
programming for a zone, go to the operating periods selection screen
and hold the "
- " Heating symbol (18) until you see “ ---- “. In this way,
the user can manually set the desired temperature setpoints for any
time during the day.
11.3 Boiler timer programming
This timer is used to adjust the switching on and off periods of the
boiler functioning. To disable the timer, select boiler timer
programming ( ) and set it to “
- - - - “ by pressing " - " of the boiler
temperature touch button
(18)
. The boiler timer will be cancelled and
it will be switched on permanently.
11.4 Programming the Fuel suction system
This programme displays the status of the pellet suction system. This
process is used to adjust the periods during which the operation of the
pellet suction system will be enabled or disabled. To disable the timer,
select the Fuel suction system timer programming (
) and set it to
“- - - -“ by pressing "-" of the boiler temperature touch button
(18)
.
timer will be cancelled and it will be switched on permanently.
11.5 DHW recirculation function timer programming (DHW tank option only)
This timer is only displayed when the DHW recirculation function is
selected in the multifunction relay parameter (P.20 = 2) of the
”Technical Menu”. It is used to adjust the switching on and off periods
of DHW recirculation pump. To disable the timer, select the DHW
recirculation timer programming (
) and set it to “- - - -“ by pressing
"-" of the boiler temperature touch button
(18)
. The timer will be
cancelled and DHW recirculation pump will be switched on
permanently.