
EN 28
HOW TO USE THE MACHINE
– engage the parking brake on slopes;
– pull out the lever (1) and tip up the grass-
catcher to empty it;
– close up the grass-catcher so that it hooks
onto the pawl (2).
At times the audible
warning may be heard at the moment of
engaging the blade even when the grass-
catcher has been emptied. This is due to
grass-cuttings left on the sensor (3) of the
micro-switch. To stop the signal, disengage
the blade and then immediately engage it
again.
Always keep the sensor (3) free of grass-cut-
tings.
5.4.7 U
NBLOCKING THE COLLECTOR CHANNEL
Cutting very tall or wet grass, particularly at too high speed, can cause the col-
lector channel to become blocked. Should this happen, it will be necessary to:
– stop forward movement immediately, disengage the blades and stop the
engine;
– take off the grass-catcher or stone-guard;
– remove the accumulated cuttings, reaching them from the exit of the collector
channel.
This job must only be performed with the engine turned
off.
5.4.8 E
ND OF MOWING
When you have finished mowing, disengage the blades, lower the engine speed
and ride the machine with the cutting deck in the highest position.
!
WARNING!
NOTE
1
2
3
Содержание TM-92.14-H
