Dolmar TM-92.14-H, Руководство оператора, Страница: 76 / 257

5.4 USING THE MACHINE
5.4.1 S
TARTING
All starting operations have to be effected in an open or
well ventilated area! ALWAYS REMEMBER THAT EXHAUST GASES ARE
TOXIC!
To start the engine:
– open the fuel stopcock (1)
( if fitted);
– put the transmission into neutral («N») (
☛
4.22 or
4.32);
– disengage the blades (
☛
4.7);
– engage the parking brake on sloping ground;
– when starting from cold, move the accelerator lever
to the «CHOKE» position shown on the label;
– if the engine is already warm, just put the lever
between «SLOW» and «FAST»;
– put in the key and turn to «ON» to make electrical
contact, then turn to «START» to start the engine;
– release the key once the engine has started.
When the engine has started, put the accelerator in the «SLOW» position.
The choke must be closed as soon as the engine is running
smoothly. Using it when the engine is already warm can foul the spark plugs
and cause the engine to run erratically.
The choke must be closed as soon as the engine is running
smoothly. Using it when the engine is already warm can foul the spark plugs
and cause the engine to run erratically. Turn the key to the «OFF» position, wait
for a few seconds and then repeat the operation. If the malfunction continues,
refer to chapter «7» of this manual and to the engine manual.
Always bear in mind that the safety devices prevent the
IMPORTANT
NOTE
IMPORTANT
➤
!
DANGER!
EN 24 HOW TO USE THE MACHINE
1