Doka Xclimb 60, Инструкция по сборке и эксплуатации

Страница: 96 / 128

96 999801002 - 02/2017
General remarks User Information Automatic climbing formwork Xclimb 60
Variant 2: Position Hydraulic distributor Xclimb 60
V45 on the unit for repositioning
Note:
Do not interconnect two or more units via one hydraulic
system.
The lines of any one hydraulic system must always lead
from and to the same unit.
➤ Position Hydraulic distributor Xclimb 60 V45 on the
unit for repositioning.
➤ Connect the Hydraulic distributor Xclimb 60 V45 to
the hydraulic unit with Hydraulic hoses SKE 6.50m.
➤ Screw the dustproofing caps of the connector and
the socket into each other (to prevent soiling).
A Hydraulic unit Xclimb 60 V45 50/60Hz
B Hydraulic hose SKE 6.50m
C Hydraulic distributor Xclimb 60 V45
D Pair of hydraulic hoses Xclimb 60 DA
E Hydraulic cylinder Xclimb 60 DA
F Lifting mechanism B Xclimb 60
A Hydraulic hose SKE 6.50m
B Connector, BG4
C Socket, BG4
928 -2 -
10
48
02
A
C
B
B D
F
E
92817-807
B
C
A
Line distributors enable a second Hydraulic dis-
tributor Xclimb 60 to be positioned on the unit
for repositioning.
Consequently, up to 8
hydraulic cylinders can
be operated by one unit at the same time.
A Hydraulic unit Xclimb 60 V45 50/60Hz
B Hydraulic hose SKE 6.50m
C Line distributor M
D Line distributor S
E Hydraulic distributor Xclimb 60 V45
F Pair of hydraulic hoses Xclimb 60 DA
G Hydraulic cylinder Xclimb 60 DA
H Lifting mechanism B Xclimb 60
928 -2 -
10
48
03
A
E
E
C
F
F
B
B
D
H
H
G
G