Docomo SH-10C, Инструкция по эксплуатации

Страница: 88 / 169

e07_1_dv85.fm
[86/110]
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
86
Others
C
Calling
C
Osaifu-Keitai
Make sure that the warranty card is included with
your FOMA terminal at the time of purchase. Check
that the name of the retailer, the date of purchase,
and the necessary details have been filled in on the
warranty card. Be sure to keep it in a safe place.
Contact the retailer if any necessary details on the
warranty card are not completed.
The warranty period without charge is 1 year from
the date of purchase.
For the purpose of improvement, the specifications
for this product and its accessories are subject to
complete or partial change without prior notice.
Not activated by touching or pressing keys
Make sure All lock is not set. P. 47
Make sure the FOMA terminal is not turned
off.
P. 31
UIM does not recognize
Is a UIM inserted facing right direction? P. 29
Make sure the UIM (blue) is not inserted. P. 29
Clock is incorrect
Clock may become incorrect if the power is
turned on for a long time.
Make sure Auto time adjust is set to [ON]
and turn the power on again in a location
with good signal conditions.
–
Calls cannot be made with the dial
Make sure All lock is not set. P. 47
Make sure Keypad dial lock is not set. P. 47
Make sure self mode is not set. P. 47
Connection cannot be made ([ ] does not
disappear even after moving to another place
or calls cannot be made/received even though
signal status is not bad)
Turn the power on again or attach the
battery pack or UIM again. P. 29
P. 31
Depending on the signal type, even though
status is “inside the service area” or “[
]
(indicating signal status) appears”, making/
receiving a call may not be available. Move
to another place and call again. P. 33
Make sure Accept call from specified caller/
Reject call from specified caller is not set.
–
In crowded place, heavy telephone/mail
traffic may be caused and make it difficult to
get a connection. In such case, [Please
wait] appears and a busy signal is played.
Move to another place or call again later.
–
Cannot use Osaifu-Keitai
If the battery pack is removed or Omakase
Lock is activated, IC card functions are not
available regardless of the IC card lock
setting.
P. 47
Make sure IC card lock is not set. P. 47
Is the
b
mark of the FOMA terminal held
over the scanning device?
P. 76
Warranty and After-Sales Service
Warranty
dv85_ue.book 86 ページ ２０１１年５月９日 月曜日 午前１１時３８分