Docomo SH-10C, Инструкция по эксплуатации

Страница: 153 / 169

Manual for PC Connection_DV85.fm
34
AT * DGAPL=<n>
[,<cid>]
Sets host (APN) to accept
transmissions for incoming packet
communications. APN settings
use <cid> parameter defined by
“+CGDCONT”.
*2
Adds or deletes from Accept calls list with <n>
parameter. If <cid> parameter is abbreviated,
adds (<n>=0) or deletes (<n>=1) all of <cid>
to or from list. Adds (deletes) <cid> not
defined with “+CGDCONT” to (from) list with
this command.
n=0 : Adds to list (Adds APN defined by <cid>
to Accept calls list)
n=1 : Deletes from list (Deletes APN defined
by <cid> from Accept calls list)
AT * DGAPL=0,1
o
OK
AT
* DGAPL?
o
* DGAPL:1
OK
AT
*
DGARL=<n>
[,<cid>]
Sets host (APN) to reject
transmissions for incoming packet
communications. APN settings
use <cid> parameter defined by
“+CGDCONT”.
*2
Adds or deletes from Reject calls list with <n>
parameter. If <cid> parameter is abbreviated,
adds (<n>=0) or deletes (<n>=1) all of <cid>
or from list. Adds (deletes) <cid> not defined
with “+CGDCONT” to (from) list with this
command.
n=0 : Adds to list (Adds APN defined by <cid>
to Reject calls list)
n=1 : Deletes from list (Deletes APN defined
by <cid> from Reject calls list)
AT
*
DGARL=0,1
o
OK
AT
* DGARL?
o
*
DGARL:1
OK
AT * DRPW Displays the reception power sent
from FOMA terminal.
*2
The result from this command is in the
following format.
*
DRPW:<m>
m : 0 to 75 (reception power)
AT * DRPW
o
* DRPW:0
OK
AT * DGPIR=<n> Setting this command is valid
when establishing
communication. Enables adding
186 (send caller ID) and 184 (not
send caller ID) to host number.
Also available in dial-up network
settings.
*2
n=0 : When establishing packet
communication, connects to host (APN)
directly (default setting)
n=1 : When establishing packet
communication, adds 184 and connects
to host (APN)
n=2 : When establishing packet
communication, adds 186 and connects
to host (APN)
When 186 (send caller ID)/184 (not send
caller ID) are set by this command and in the
dial-up network settings, refer to “Send/Not
send setting on dial-up networks” on P. 23.
AT * DGPIR=0
o
OK
AT
* DGPIR?
o
*
DGPIR:0
OK
+++ Switches the FOMA terminal
mode from online data mode to
online command mode.
Escape guard interval is fixed at 1
second.
*2
―
(During
communication)
+++ (Does not
appear)
OK
AT+CACM=[<p
asswd>] Resets the total accumulated cost
recorded on the UIM.
*2
Resets the total accumulated cost recorded
on the UIM, if the password matches.
<passwd>: SIM PIN2
※ Encloses this string parameter with
quotation marks (“ ”) when entering.
AT+CACM=“0123”
o
OK
AT+CAOC=[<m
ode>] Inquires the current accumulated
cost.
*2
<mode>
0 : Inquires the cost of current call
The result from this command is in the
following format.
+CAOC:“<ccm>”
AT+CAOC
o
+CAOC:“00001E”
OK
AT command Overview Parameter/Explanation
Execution
example
[M]
[M]
[M]
[M]
[M]
[M]
[M]
Manual for PC Connection_DV85.fm 34 ページ ２０１１年５月９日 月曜日 午前１１時５９分