
e01_dv85.fm
[17/28]
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
17
Introduction
SH-10C is waterproof/dust-proof, however,
do not allow water to seep or dust to get in
the FOMA terminal and do not allow
accessories or optional parts to get wet or do
not allow dust to adhere.
The battery pack, adapters, desktop holder and the
UIM are not waterproof/dust-proof. Do not use in
humid locations such as a bathroom and do not get
wet by raining, etc. Also, when you have the handset
close to your body, humidity from sweating causes
corrosion inside and leads to malfunction. Note that
if problem is found to be due to moisture, handset
and parts are not covered by warranty and in some
cases may be irreparable. Even where repairs are
possible, repair charges will be incurred, since
damage is not covered by warranty.
Clean only with a soft and dry cloth (such as
the type used for eyeglasses).
• Forceful rubbing of the display with a dry cloth
may scratch the display surface.
• Note also that the display coating may stain if
moisture or soiling is left on the surface for a long
period.
• Never use chemicals such as alcohol, thinners,
benzene or detergents, as these agents may
erase the printing on the handset or cause
discoloration.
Occasionally clean terminals with a dry
cotton swab, etc.
Unclean terminals may result in poor connections
and loss of power. Keep terminal clean with a dry
cotton swab, etc.
Take care of the terminal while cleaning it.
1Seg
antenna
1Seg antenna
SUS/Baking
coating
Metal section
SUS/Nickel
plating, Trivalent
chromium plating
External
connector
terminal
External connector terminal SUS/Nickel plating
Cover
PC resin/UV coating
Gasket
EPDM/Silicon
coating
HDMI
terminal
HDMI terminal
SUS/Nickel plating
Cover
PC resin/UV coating
Gasket
EPDM/Silicon
coating
Infrared port
ABS resin
Charger terminal
SUS/Gold plating
microSD Card/UIM slot
ABS resin
Inside microSD Card slot
SUS/Nickel plating
UIM tray
Resin section
LCP resin
Metal section
SUS/Polyimide
resin coating
Battery storage side
Aluminium
Battery
storage
section
Surrounding section of
battery storage section
Polyamide resin
with glass
Screw
SUS/Passivation
coating
Battery
terminal
Battery terminal connector LCP
Battery terminal
Copper alloy/
Gold plating
Battery
pack
Battery pack
PC resin/Spark
erosion
Terminal section
Copper alloy/Full
surface nickel
with plating base,
Gold plating
Part
Material/Surface
treatment
Handling Precautions
General notes
dv85_ue.book 17 ページ 2011年5月9日 月曜日 午前11時38分
Содержание SH-10C
Страница 1: ...11 5 1st Edition 11E SM118 11 5 1...
Страница 118: ...11 5 1st Edition 11E SM118 11 5 1...
Страница 165: ..._dv85_E fm Kuten Code List 11 5 1st Edition _dv85_E fm 0...