Docomo SH-10C, Инструкция по эксплуатации

Страница: 120 / 169

1
Manual for PC Connection_DV85.fm
The FOMA terminal communication formats fall into three categories: packet communication, 64K data
communication and data transfer.
The FOMA terminal does not support fax transmissions.
The FOMA terminal supports data communication with sigmarion
Ⅲ
. The high-speed communication for
FOMA HIGH-SPEED area is not supported.
The FOMA terminal is not compatible with Remote Wakeup.
Unable to use 64K data communication by connecting a PC, etc. overseas.
To use packet communication overseas, communicate with IP connection (PPP connection is not available for
packet communication).
■ Data transfer (OBEX
™
communication)
Send or receive data such as images, music, phonebook entries, and messages between the FOMA terminal
and another FOMA terminal or PC, etc.
Data which can be sent and received vary depending on transfer method. Refer to “Manual (detailed edition)”
(in Japanese only) for data which can be sent and received by each transfer method.
■ Packet communication
Charges incurred are based on the amount of data sent and received. When you are only connected to the
network and are not sending or receiving data, no communication charges are incurred. Remain connected to
the network, with no charge, and only send or receive data when necessary.
By using access points that are compatible with the FOMA packet communication, such as the DOCOMO
Internet connection services “mopera U”, the data can be received and sent at speeds up to 7.2 Mbps and 5.7
Mbps respectively (A best-effort system is provided in which communication speeds vary depending on the
communication environment and network traffic conditions).
The maximum values (7.2 Mbps and 5.7 Mbps) are the values based on the technical standard, and not the
actual communication speed. The actual communication speed varies depending on the network congestion
or communication environment.
The communication speeds may slow outside the FOMA HIGH-SPEED area or when connecting to the
access point that does not support HIGH-SPEED or when using the device that does not support
HIGH-SPEED such as DOCOMO’s PDA “sigmarion
Ⅲ ”.
For a packet communication, connect the FOMA terminal to a device such as a PC using FOMA USB Cable with
Charge Function 02 (sold separately), Bluetooth function or Wi-Fi connection and perform appropriate settings.
Best suited for sending and receiving mail text data or other relatively small amounts of data at high speeds.
Note that sending or receiving large files will lead to higher communication charges.
Making voice calls while performing packet communication with a PC or other devices is possible.
■ 64K data communication
Charges incurred are based on the connection time. This communication uses access points that are compatible
with FOMA 64K data communication, such as the DOCOMO Internet connection services “mopera U”, or a
synchronous ISDN 64K access point.
For 64K data communication, connect the FOMA terminal to a device such as a PC using FOMA USB Cable with
Charge Function 02 or Bluetooth function and perform appropriate settings. Best suited for sending and
receiving relatively large amounts of data, such as downloading Data box contents.
Note that a long-time communication leads to higher communication charges.
Data communication
Data communication available for the FOMA terminal
Ir/iC/Bluetooth
communication
SH-10C
FOMA USB Cable with Charge Function 02
(sold separately)
microSD Card
DOCOMO keitai datalink
SH-10C
Manual for PC Connection_DV85.fm 1 ページ ２０１１年５月９日 月曜日 午前１１時５９分