Docomo Prime SH-06A, Инструкция по эксплуатации

Страница: 577 / 589

28
Manual for PC Connection_DV65.fm
AT+CPIN=<pin
>[,<newpin>] Enters the UIM password (PIN1,
PIN2).
*2
<pin>
Enters PIN1 while waiting for PIN1 input
(Enter <pin> parameter only)
Enters PIN2 while waiting for PIN2 input
(Enter <pin> parameter only)
Enters PUK1 while waiting for PUK1 input
Enters PUK2 while waiting for PUK2 input
※ Encloses this string parameter with
quotation marks (“ ”) when entering.
<newpin>
Enters a new PIN1 while waiting for PUK1
input
Enters a new PIN2 while waiting for PUK2
input
※
Encloses this string parameter with
quotation marks (“ ”) when entering.
AT+CPIN?
o
+CPIN:SIM PIN1
OK
(Indicates waiting
status for PIN1
input)
AT+CPIN=“1234”
o
OK
AT+CPIN? o
+CPIN:SIM PUK1
OK
(Indicates waiting
status for PUK1
input)
AT+CPIN=“12345
678”,“1234”
o
OK
AT+CR=<mode> Sets whether to display packet
transmission/64K data
communication before
“CONNECT” result code is
displayed during line connection.
*1
“GPRS” is displayed for packet
transmission, and “SYNC” is
displayed for 64K data
communication.
<mode>
0:
Does not display when line is connected
(default setting)
1: Displays when line is connected
AT+CR=1
o
OK
ATD
* 99 *** 1#
+CR:GPRS
CONNECT
AT+CRC=<n> Sets to use extended results code
at reception.
*1
n=0: Does not use extended results code
(default setting)
n=1: Uses extended result codes
AT+CRC=0
o
OK
AT+CREG=<n> Sets service area information on
or off. *1
When AT+CREG=1 is set, information is set
in the format “+CREG:<stat>”. 0, 1, 4 or 5 can
be set for the <stat> parameter.
<n>
0:
Does not send (default setting)
1: Sends
<stat>
0:
Outside area
1: Inside area (home)
4: Unknown
5: Inside area (visitor)
AT+CREG=1
o
OK
(Set to send)
AT+CREG?
o
+CREG:1,0
OK
(Indicates outside
area)
+CREG:1
(Moved from
outside area to
inside area)
AT+CUSD=[<n
>[,<str>[,<dcs>]
]] Changes setting toward net for
optional services, etc.
*1
<n>
0:
Answers without intermediate result
(default setting)
1: Answers with intermediate result
<str>
Service code
※ Refer to “Mobile Phone User’s Guide
[Network Services]”.
<dcs>
0: Fixed value
AT+CUSD=0,“xxx
xxx”
o
OK
AT+FCLASS=<
n> Sets the mode. *1 <n>
0:
Data (fixed value)
AT+FCLASS=0
o
OK
AT+GCAP Displays the ability list of the
FOMA terminal.
*2
―
AT+GCAP
o
+GCAP:+CGSM,
+W
OK
AT+GMI Displays FOMA terminal maker
name in single-byte alphanumeric
characters.
*2
―
AT+GMI
o
SHARP
OK
AT command Overview Parameter/Explanation
Execution
example
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
Manual for PC Connection_DV65.fm 28 ページ ２００９年５月７日 木曜日 午前８時４３分