Docomo Prime SH-06A, Инструкция по эксплуатации, Страница: 105 / 589

103
e05_dv65_7e.fm
[103/114]
So
un
d/
Scree
n
/L
ig
ht Settin
g
s
Display the clock on the stand-by display.
1
In the Custom menu, select [Settings]
/
[Disp/LED/
Power saver]
/
[Set screen]
/
[Clock display].
2
Select the [Clock display] field
/ t /
select the type.
;
Select [ON(Large)].
;
Select [ON(Small)]/[OFF]
/
proceed to step 4.
3
Select the [Set clock style] field
/ t /
select an
image
/ i
.
:
To check the image: Select the image
/ t
.
4
Press
i
.
■ Moving position of clock in stand-by display
The operation is available only when Clock display is set to [ON(Large)].
1
Select the stand-by clock of the stand-by display with
the Optical TOUCH CRUISER
/ t
(for 1+ seconds).
:
The pointer changes to [
&
].
:
In the viewer position: Touch the stand-by clock of the stand-by
display for a while.
2
Move up/down/left/right with the Optical TOUCH
CRUISER.
:
In the viewer position: Keep touching the stand-by clock and slide up/
down/left/right.
:
The position is fixed in approximately 2 seconds after the position of
clock is adjusted.
Display the stand-by memo on the stand-by display.
1
In the Custom menu, select [Settings]
/
[Disp/LED/
Power saver]
/
[Set screen]
/
[Stand-by memo disp]
/
[ON].
■ Saving stand-by memo
Save up to one stand-by memo.
1
While displaying the stand-by memo, press
o
(for 1+
seconds).
:
To switch among stand-by, calendar and stand-by memo display:
Press
H
.
:
Alternatively, select the stand-by memo with the Optical TOUCH
CRUISER and press
t
to display it.
:
In the viewer position, touch the stand-by memo to point the cursor.
Then, touch again to display and operate with the touch panel.
2
Enter memo
/ t
.
:
Enter up to 115 single-byte (57 double-byte) characters.
While stand-by is displayed in the viewer position, start charging
to show the Desktop clock.
The Desktop clock ends in 2 hours after the display is started, and
stand-by reappears.
The design of Desktop clock varies depending on the date and day of the
week.
1
In the Custom menu, select [Settings]
/
[Disp/LED/
Power saver]
/
[Set screen]
/
[Desktop clock]
/
[User
setting]
/
[2 hours].
Displaying clock
<Clock display>
Displaying stand-by memo
<Stand-by memo disp>
Desktop clock
Displaying Desktop clock while
charging
Displaying Desktop clock
<User setting>
The Desktop clock is shown at [Brightness 3].
Perform the following operations to return to stand-by. Press
&
to show
the Desktop clock again.
Pressing
&
Receiving mail
Receiving a call Operating the alarm
dv65_E.book 103 ページ ２００９年５月７日 木曜日 午前９時３分