Docomo Prime SH-06A, Инструкция по эксплуатации

Страница: 506 / 589

504
e22_dv65_7e.fm
[504/520]
Ap
pe
nd
ix
/T
ro
ub
le
sh
o
o
ti
ng
:
During rewriting, all of the keys are disabled. It is not possible to
cancel rewriting. Also, calls cannot be received while rewriting is
being performed.
:
Upon the completion of rewriting, the power is automatically turned
off, and then back on again.
3
When power is turned on, software update starts
automatically.
:
During update, all of the keys are disabled. It is not possible to cancel
update. Also, calls cannot be received while update is being
performed.
:
Approximately 5 seconds after the completion of updating, the power
is automatically turned off, and then back on again.
4
[Your update is complete] appears
/ t
.
:
Software update ends and the stand-by display appears.
:
If
t
is not pressed when the update is completed, the stock icon [
6
]
(Update complete) appears in the stand-by display. Once the stock
icon [
6
] (Update complete) is confirmed, it disappears.
■
When server is congested
When [Server is busy] appears, select [Reserve] and
set a date on which updating will be performed
(
n
P. 504).
■
Post-update display
When the stock icon [
6
] (Update complete) or [
6
] (Check update) appears
in stand-by, select the stock icon. If the terminal security code is entered
when software update is incomplete, a message stating so appears. Retry
update.
Set date and time to update software when downloading takes too much
time or the server is extremely congested.
1
Select [Reserve].
:
Schedule selection screen appears.
:
The time and date are the same as the server
time.
2
Select the preferred date and time
/ t /
[Yes].
:
Alternatively, select the date and time after selecting [Other date/
time] and accessing the server. In the screen for selecting times, the
schedule status appears as [
A
:Avail] or [
C
:Limited] for each time
slot. Select a time to reconnect to the server and show schedule
candidates. Select a schedule.
■ When reserved date and time arrives
1
[Ready to update?] appears
/ t
.
:
Approximately 5 seconds after [Ready to update?] appears, software
update automatically starts.
Setting a time at which update will be performed
<Reserve>
dv65_E.book 504 ページ ２００９年５月７日 木曜日 午前９時３分