64
Settings
Authentication (Default: CHAP)
Select the authentication method of the
access point.
• None
• PAP
• CHAP
e
To register a new access point, click
[Save].
f
Click [Apply] to save the setting.
Protecting the Terminal with
the Security Code
When this function is set, network
communication is locked and entering the
security code (PIN1 code) is required when
logging in to the setting page.
a
In the top menu, click [NETWORK].
b
In the submenu, click [PIN1 lock].
c
On the setting screen, set the required
items.
PIN1 lock status
The current setting condition is displayed.
• Enable: PIN1 lock is set
• Disable: PIN1 lock is canceled
■
When Enable is set
PIN1 code to disable
Enter PIN1 code set to the miniUIM card.
■
When Disable is set
PIN1 code to enable
Enter PIN1 code set to the miniUIM card.
d
Click [Apply].
e
When “Enabled” is set, hold down the
power button for over 2 seconds to turn
the power off, and then turn on again.
