55
Settings
Setting Wireless LAN
Note
• When using wireless LAN overseas, check the
available frequency band, laws, regulations or
other conditions of the country beforehand.
Setting Basic Functions of
Wireless LAN
a
In the top menu, click [WLAN].
b
In the submenu, click [Basic Setting].
c
On the setting screen, set the required
items.
SSID (Default: L04D_XXXXXXXX)
Set the network name (SSID) of the wireless LAN.
You can enter up to 32 letters with one-byte
alphanumeric, “- (hyphen)” and “_ (under bar)”.
Country (Default: JAPAN)
Select a country name where this terminal is used.
(When JAPAN or KOREA is selected, you can
select up to 13 channels. When CANADA or
UNITED STATES is selected, you can select
up to 11 channels.)
Channel (Default: Auto)
Select a channel of wireless LAN.
IEEE802.11 Mode: (Default: 11b/g/n)
Select an operation mode of wireless LAN.
• 11b only
• 11b/g
• 11g only
• 11n only
• 11b/g/n
(When the security mode ( → P57) is set to
“WEP”, or when the mode is set to “WPA-PSK”
or “WPA2-PSK” and “TKIP” is selected, “11n
only” or “11b/g/n” cannot be selected.)
SSID Broadcast (Default: Enable)
Select whether to display SSID on the wireless
LAN terminal.
• Enable: SSID is displayed
• Disable: SSID is not displayed
Privacy separator (Default: Disable)
Select whether to prohibit communication
between wireless LAN terminals.
• Enable: Communication is prohibited
• Disable: Communication is not prohibited
d
Click [Apply] to save the setting.
