59
Settings
■
When Enable is set
WPS type (Default: Push button)
Select a type of WPS function.
• Enable only: When connect with WPS type
after pressing the WPS button of this
terminal (WPS function is not activated if
you press [Apply] button.)
• Push button: When you use the WPS button
or connect with WPS type after clicking
[Apply] button
• WPS PIN: When you connect by entering the
PIN code (8-digit number) for WPS
WPS PIN
Enter the specified PIN code.
d
Click [Apply] to save the selected WPS
setting.
The saved WPS setting is valid even after
restarting of this terminal.
Setting MAC Address Filter
a
In the top menu, click [WLAN].
b
In the submenu, click [MAC address filter].
c
On the setting screen, set the required
items.
Restrict mode (Default: Disable)
Select an operation mode of MAC address
filter function.
• Disable: MAC address filter is not used
• Allow: Allows the connection only to this
terminal with the specified MAC address
• Deny: Prohibits the connection to this
terminal with the specified MAC address
■
When Allow or Deny is set
Mac addresses entry field appears.
Enter the specified terminal's MAC address.
You can specify up to 10 MAC addresses.
d
Click [Apply] to save the setting.
