Docomo FOMA SO702i, Руководство пользователя

Страница: 300 / 364

298
Appendix/
External Device Interface/T
roubleshooting
Dual Style Feature
The Dual Style is a name for a set of panels with which you can dress up the looks of your
FOMA terminal on both front and rear sides.
You can change the supplied Front Cover SO01 and Rear Cover SO02 with an optional
Dual Style SO01. For information on how to attach and remove the Dual Style (rear cover),
see P.35.
• You can also set a menu pattern by downloading it from “SO@Planet”, which is available in several themes allowing
you to enjoy a menu design best matched with your Dual Style (P.99).
Attaching and Removing the Dual Style (Front cover)
When attaching/removing the Dual Style (front cover), make sure to power off and close the
FOMA terminal.
• Holding too hard or attaching/removing the front cover in a manner other than described below may damage it.
■
Removing the front cover
1
Press the incoming indicator section.
Keep a finger on the front cover to prevent it from bouncing.
2
Lift to remove the front cover in the direction of the
arrow while pulling the edge of it with your fingers.
■ Attaching the front cover
1
Align the protrusion of the front cover with the
groove on the FOMA terminal.
2
Press the other end of the front cover until it clicks
into place.
Press the both sides of the front cover (the boxed areas in
the illustration to the right) several times to attach it securely.
1
2
●
Using the FOMA terminal with the Dual Style removed may lead to strength reduction and may result in causing
damage or malfunction of the FOMA terminal.
● When the dust gathers between the FOMA terminal and Dual Style, remove the Dual Style and wipe the dust
with a soft cloth.
● The Dual Style SO01 may not be available in some stores.
Groove
Protrusion
Front cover
Incoming indicator section
Dual Style