Docomo FOMA SO702i, Руководство пользователя, Страница: 353 / 364

12
Setting Communications Without
the FOMA PC Setup Software
The procedure for setting packet or 64K data communi-
cations without using the FOMA PC setup software is
given below.
To perform the settings, communication software for
entering AT commands is necessary. In this section, the
“Hyper Terminal” preinstalled as a standard feature in
the Windows is used for explanation.
Host (APN) Setting
Set a host (APN) for performing packet communications.
• If you are using “mopera U” or “mopera” as the packet
communications host, you do not have to set a host for 64K
data communications.
Example: When using Windows XP
1
Connect the FOMA terminal to a PC.
2
Click [
スタート
]
→
[
すべてのプログラム
]
→
[
アクセ
サリ ] → [ 通信 ] → [ ハイパーターミナル ].
Hyper Terminal is started up.
When using Windows 2000 Professional/Windows Me
Click [ スタート ] → [ プログラム ] → [ アクセサリ ] → [ 通信 ]
→ [ ハイパーターミナル ].
When using Windows 98
Click [ スタート ] → [ プログラム ] → [ アクセサリ ] → [ 通信 ]
→ [ ハイパーターミナル ]. Double-click [Hypertrm.exe].
3
Enter any name at [ 名前 ] and click [OK].
4
Enter a dummy (nonexistent) phone number (such
as “0”) at [
電話番号
], select [FOMA SO702i] at [
接続
方法 ], and click [OK].
The connection window appears.
5
Click [ キャンセル ].
6
Enter a host (APN) and press # .
Input format
AT+CGDCONT=<cid>, “PPP”, “APN” #
If the AT command you entered is not displayed
Enter “ATE1 # ”.
When the host (APN) is set, “OK” appears.
7
Click the [ ファイル ] menu → [ ハイパーターミナルの
終了
].
Hyper Terminal ends.
• When the message
現在、接続されています。切断して
もよろしいですか？ (The line is connected. Are you sure
you want to disconnect?) appears, select [ はい ].
• When using Windows XP, the message ““XXX”
と名前付け
された接続を保存しますか？
” (Do you want to save the
connection named “XXX”?) appears. You do not need to
save the connection.
• When using Windows 2000 Professional, Windows Me, or
Windows 98, the message “
セッションXXXを保存します
か？
” (Do you want to save session XXX?) appears. You
do not need to save the session.
To reset a host (APN)
Input format
AT+CGDCONT=
# (Reset all cid)
AT+CGDCONT=<cid> # (Reset a specific cid only)
To display a current host (APN)
Input format
AT+CGDCONT?
#
Enter the registration
number 2 or a number
between 4 and 10. Enclose the host name you
enter in double quotes.