Docomo FOMA SO702i, Руководство пользователя

Страница: 225 / 364

223
i-Channel
Display i-Channel
Displaying the i-Channel
1
Press (i.ch) in the stand-by display.
The channel list appears.
2
Select a channel and press .
● You may receive specific information when the channel list
is displayed, depending on the terms of use.
When You Receive i-Channel
→ 最高２０℃ １０
When you receive information, the
information is automatically run as
Telop text in the stand-by display.
To display the channel list
Press (i.ch).
Telop
● When you receive i-Channel information, “ ” → “ ” flashes.
Even if you receive information, the FOMA terminal does
not sound the ring tone or vibrate, and the incoming
indicator does not operate, either.
● You can adjust the scrolling speed of the Telop text and
also set to hide the Telop text (P.95).
● If you switch the UIM to another i-Channel-compatible
terminal, the Telop text does not appear. When the
information is automatically updated or if you press
(i.ch) to receive latest information, the Telop text starts
running automatically.
●
If you change the host, the Telop text may be turned off
and information may not be automatically updated. To
receive latest information, press
(i.ch) and display the
channel list. The Telop text starts running automatically.
●
You can change the i-Channel host using the Host selection
(P.162). Normally, you do not need to change the host.
●
You cannot or may not receive information when the
FOMA terminal is powered off or under the weak radio
wave condition such as outside of the service area. Press
(i.ch) to receive information. It is automatically run as
Telop text in the stand-by display.
● Telop text is not displayed in the following cases.
-
When the Lock all is set
- When the PIM lock is set
- When the Public mode (Driving mode) is set
- When the UIM is not inserted
- When the i-Channel or i-mode service is canceled
(When the i-mode service is canceled prior to
cancellation of the i-Channel, the Telop text is left
displayed.)