Docomo FOMA SO702i, Руководство пользователя

Страница: 163 / 364

161
i-mode/i-motion
Running i- α ppli from the Current Display
If the current display contains any i- α ppli link, the software can be started to run directly
from the display. The software can also be started using the infrared communications
(i-
α ppli To).
• Download software that can be started by the i- α ppli To beforehand.
• i- α ppli cannot be started to run when the i- α ppli To is set to [No] (P.215).
1
Select i- α ppli link in the display and press .
The screen for confirming whether to start i- α ppli appears.
2
Select [Yes] and press .
The software is started to run.
Starting the Infrared Communications from the Current Display
If the current display contains any item to start the infrared communications, the infrared
communications can be started directly from the display.
1
Select the item in the display and press .
The screen for confirming whether to start the infrared communications appears.
2
Select [Yes] and press .
The infrared communications is started.
Setting i-mode
Setting the Connection Timeout
Default 60 sec
The duration before disconnecting the FOMA terminal automatically can be set when you
cannot send or receive data due to heavy traffic at the i-mode center.
1
From the i-mode menu, select [i-mode setting]
→
[Common setting]
→
[Connection
timeout] and press .
[60sec] : Disconnect automatically when unable to send/receive data for 60 seconds.
[90sec] : Disconnect automatically when unable to send/receive data for 90 seconds.
[Unlimited] : Do not set the connection timeout (however, the connection can be disconnected due to the
radio wave condition or other reasons).
2
Select the waiting duration and press .
The Connection timeout is set.
i-mode setting