Docomo F-04B, Инструкция по эксплуатации

Страница: 26 / 165

24
Ba
si
c O
p
e
ra
tio
n
Before Using
Battery level
Battery level is always displayed on the display, but you can check
it by menu operation etc.
Display unit
a m e h
Settings & NWservices
e g
Clock &
Other
e e
Info & Reset
e d
Battery level
Keypad unit
a m e h
Settings & NWservices
e i
Keypad
unit
e c
Keypad battery level
In separated style, while pressing
X
on QWERTY keypad,
press
b
. You can check it by the color of arch light.
Point
･
When FOMA terminal turns ON and the units are joined, if battery level of
either unit becomes 1 (including the status that the battery is almost
exhausted) and the other unit is in battery level 3, power feeding is
executed automatically (interunit power feeding).
Indication
Display unit
Keypad unit
Sounding by menu
operation 3 times Twice Once
Arch light Green Yellow Red
Ample charge
Almost exhausted
(Charge the battery)
Before Using
Turning power ON - Configuring default setting
Perform the following operations after turning the power ON for
the first time.
a
On numeric keypad,
f
(2 sec. or
more) or on front keypad,
i
(2
sec. or more)
b
"Yes" or "No" on a confirmation
screen of enlarged menu setting
The screen shown to the right appears.
c
Set required items
e C
[Complete]
Always set Terminal security code and Request
permit/deny. If you exit without setting, Initial
setting screen reappears when the power is turned ON the next time.
d g
on a confirmation screen of software update function
The stand-by display appears.
Point
･
When FOMA terminal turn ON with the units joined, after initial settings,
the keypad unit is automatically registered as a Bluetooth device and
appears on the display.
･
In separated style, turning OFF the display unit turns OFF the keypad unit.
However, even if you turns OFF the keypad unit, the power of the display
unit does not turn OFF.
･
If no operation is performed, the display light is turned off automatically
according to the settings in Light time-out or Power saving mode. The
display light turns on again if there is any operation or incoming call.
Turning the power off : On numeric keypad,
f
(2 sec. or more) or on
front key,
i
(2 sec. or more)
Changing initial settings :
m e hgeg
Changing screen display to English :
m e hbfc e
Select "English"
<Initial setting screen>