Docomo F-04B, Инструкция по эксплуатации

Страница: 139 / 165

23
6
Confirm that "OK" is displayed and click " ファイル (File)" → Click " ハイパー
ターミナルの終了 (End HyperTerminal)".
7
When confirming disconnection, click "
はい
(Yes)"
→
When confirming saving,
click "
いいえ
(No)".
Setting Show/Hide caller ID
You can set to show/hide call ID for packet communication at once.
Caller ID is your important information. Take care when deciding to disclose your caller ID.
I
If "Not notify" is set when using mopera U or mopera, connection is unavailable.
<Example> Setting under Windows XP
1
Perform Step 1 - 4 in "Setting the dialup connection (APN)".
2
Enter notify/not notify of caller ID in the format "AT ＊ DGPIR=<n>" → .
<n> : 0-2
0 : Connect directly (Default)
1 : Connect prefixing 184 (Not notify)
2 : Connect prefixing 186 (Notify)
3
Confirm that "OK" is displayed and click " ファイル (File)" → Click " ハイパー
ターミナルの終了 (End HyperTerminal)".
4
When confirming disconnection, click "
はい
(Yes)"
→
When confirming saving,
click "
いいえ
(No)".
Show/Hide caller ID function by dialup network settings
The dialup network settings can also be used to append 186 (Notify)/184 (Not notify) to the dialup
connection number.
I
The Show/Hide of caller ID when both of the ＊ DGPIR command and dialup network settings are set is as
shown below.
･
If nothing is displayed even when AT command
is entered, enter ATE1 and press
.
Setting made by ＊ DGPIR
Dialup network command
setting (<cid>=3)
No setting Caller ID is not sent. Caller ID is sent.
＊ 99 ＊＊＊ 3#
Caller ID is sent. Caller ID is not sent. Caller ID is sent.
184 ＊ 99 ＊＊＊ 3#
Caller ID is not sent.
186 ＊ 99 ＊＊＊ 3#
Caller ID is sent.