24 Chapter 3
Touch
on
Gain
to change the gain level (signal sensitivity). The
higher the gain the more sensitive the unit will be making it easier to
measure lower thickness values. But excessive gain can also cause
erroneous measurements.
The gain is typically adjusted when changing transducers.
Touch the
-
keys to adjust the gain
value and touch
to save and exit.
Touch
to exit without making changes.
Figure 3.16: Adjust gain level
The unit will shutdown automatically if no key is touched or no
measurement is made when you set the auto-off time.
Touch
on
AutoOff
to set the time before the unit automatically
shutdown.
Touch the
-
keys to set the time and
touch
to save and exit.
Touch
to exit without making changes.
Figure 3.17: AutoOff time
Содержание QS3 B
Страница 1: ...I ...
Страница 2: ...P N QSD 301 ENG Rev 3 2012 ...
Страница 43: ...33 Capitulo 4 P N QSD 501 ENG Rev 3 2012 2012 dmq ...
