DMP Electronics 1100T, Инструкция по установке и программированию

Страница: 11 / 24

Digital Monitoring Products, Inc. | 1100T Wireless Translator Installation and Programming Guide 7
4. At
DMP WIRELESS
, select
NO
.
5. At
COMP WLS
, select
YES
.
6. At COMP WLS SRL # , either manually enter the serial number of the transmitter or
transmit the serial number to the panel:
• Manually: Press the first select key or area and type in the transmitter’s
serial number.
• Transmit: Choose LRN at prompt to display TRANSMIT NOW . Tamper
the transmitter. Once the panel has received the tamper signal, the
serial number will display.
Note: If programming a sensor with multiple contacts, use the
appropriate serial number. See LT-0705 1114 Wireless Four-Zone
Expander Installation Guide for programming instructions.
7. Once the serial number is entered, press CMD .
8. At the transmitter contact display, press a select key to choose from contact 1,
2, 3, or 4. Default is 1 .
Note:
If programming a sensor with one contact, leave the transmitter
contact option at the default.
9. At the transmitter supervision time, press a select key to choose from 0H, 4H
(if zone type is FI, CO, or SUPV), 12H, or 24H. Default is 24H .
10. Save and exit programming.