DMP Electronics 1100T, Инструкция по установке и программированию

Страница: 10 / 24

6 1100T Wireless Translator Installation and Programming Guide | Digital Monitoring Products, Inc.
Select a Location for the Translator
The 1100T translator provides a Survey LED capability to allow one person to confirm
communication with the panel while the cover is removed.
1. While remaining in panel programming, hold the translator in the exact
desired location.
2. Press the tamper switch to send data to the panel and determine if
communication is confirmed or faulty.
Confirmed: If communication is confirmed, for each press or release of
the tamper switch, the LED blinks immediately on and immediately off.
Repeat this test 5 times to confirm ten separate consecutive LED
blinks. Any indication otherwise means proper communication has not
been established.
Faulty:
If communication is faulty, the LED remains on for about 8
seconds or flashes multiple times in quick succession. Relocate the
translator or receiver until the LED confirms clear communication.
3
Program Zone Information
1. In ZONE INFORMATION , enter the wireless zone number.
2. At *UNUSED* , enter the zone name.
3. Select a ZONE TYPE .
4