DLoG DLoG X 10, Руководство пользователя

Страница: 22 / 160

Important safety notices
10 Manual DLoG X Series
2.5. Exchanging and extending modules
Carefully follow the notices on opening and closing the device!
Persons qualified to handle replacement or expansion
Devices belonging to the DLoG X series may only be opened for the purposes of
adding or replacing modules. Only qualified electrical or electronics engineers or
persons trained by DLoG are authorized to carry out such work.
Fuse failure
If the fuse for the integrated power supply blows immediately after being replaced,
send the unit to us for servicing without delay.
No battery changes
The RTC of the DLoG X device is powered by a lithium battery fixed to the
motherboard. This battery
should not be exchanged under any circumstances , as
this requires soldering! Should a lithium-battery change be necessary, the device must
be sent to DLoG. Changing the lithium battery yourself will instantly void all present
and future guarantee and liability claims
Use of an unsuitable battery or incorrect installation may cause the battery to explode!
Components approved by DLoG
When adding and exchanging modules, only use components approved by DLoG for
use in the DLoG X device. Before installing a component, please contact DLoG to
ensure that the desired module can be exchanged or installed
When installing expansion modules, proceed with utmost caution. Any damage
caused while installing or replacing modules will instantly void all present and future
guarantee and liability claims