DLoG DLoG X 10, Руководство пользователя

Страница: 18 / 160

Important safety notices
6 Manual DLoG X Series
2.2. Power supply / External peripheral devices
Low voltage networks
Devices in the DLoG X Series that have an AC power pack should only be connected
to TN and TT networks. IT networks are not permitted as dangerous electric shocks
cannot be ruled out here.
Operation in an emergency
In cases of emergency (such as damage to the power cable or housing, or ingress of
liquid or other foreign bodies), the device must be disconnected immediately from the
power supply. Contact technical support staff at once.
If, after replacement, the fuse fed by the internal power supply blows again, the device
must be sent in for servicing immediately
Data cables may never be connected or disconnected during an electrical storm.
External peripheral devices
Before connecting or disconnecting peripheral devices (exception: USB devices), the
DLoG X device must be disconnected from the power supply! Otherwise, this could
seriously damage both the DLoG X and the connected devices!
Please ensure that external peripheral devices with their own power supply are
switched on
at the same time or after the DLoG X device. If this is not possible,
please ensure that the DLoG X device is adequately protected from power leakage
caused by an external device.