DLI DLM-4 ZONE, Руководство пользователя

Страница: 4 / 19

DLM-4 ZONE DLM-4 ZONE
Controller Controller
06 07
ZONE 1 ZONE 1 ZONE 1
ZONE 2 ZONE 2 ZONE 2
ZONE 3 ZONE 3 ZONE 3
5. Determining the Zones
4. Installing the DLM-4 Zone
Controller
Determine where to locate the main controller. The controller comes
with a simple to use DIN type bracket. Pull the 4 tabs outward to
release the bracket from the unit, mount the bracket to a wall or
surface, place the unit back on the bracket and press the 4 tabs back
in to lock the unit in place.
The interconnecting RJ12 communication cables are available in
different lengths, select the correct length for your application. The
DLM-4 Zone Controller is supplied with a 4ft and 16ft cable. These
interconnecting RJ12 cables are also available in lengths of 25ft and
50ft. Select the correct length for your application.
Release /
pull out (4) tabs
Installation of the DLM-4 Zone Controller starts by first designing
the DLI fixtures layout and the DLI fixtures will be connected to the
controller. Each zone can have separate dimming actions to take
place, and each zone can have it own separate temperature sensor
that monitors the zone temperature. All of the zones are controlled
individually based on the 24-hour timeclock built into the DLM-4 Zone
Controller.
Having 4 zones allows the user to create multiple lighting layouts (and
dimming sequences) based on their individual preferences. Some
examples are shown below.
Each zone can be set up to be a “staged” dimming zone. In other
words, each zone has it own independent dimming temperature
setting as well as the dimming action.
The example in the above left box shows 2-zones of lights in a
“Checkerboard” pattern. In this example zone 2 may be set to dim at
a slightly lower temperature than zone 1 would be set for. That will
create a “Staged” dimming control function where zone 1 will continue
to operate at full power while only zone 2 lights are dimmed.
The example in the above right box shows 3-zones of light set up in
a line. Each zone can have independent temperature sensors and
separate dimming settings.
ZONE 1
ZONE 1
ZONE 1
ZONE 1
ZONE 1
ZONE 2
ZONE 2
ZONE 2 ZONE 2