DLI DLM-4 ZONE, Руководство пользователя

Страница: 2 / 19

DLM-4 ZONE DLM-4 ZONE
Controller Controller
02 03
PLEASE READ FIRST
À LIRE EN PREMIER LIEU
1. Introduction
CONTENTS
BEFORE attempting to install of use this product, it is important to
read and fully understand this instruction manual. It will provide
detailed instructions and guidelines that will help to set up the unit,
and to understand the full capability of this unit. Observe all local and
national electrical codes and only install this unit as allowed in your
area. Any use or application of this product, other than for its original
intended purposes are prohibited. If you have any questions, please
contact us:
Dutch Lighting Innovations, Kraaiendonk 22, 5428 NZ
Venhorst, The Netherlands
AVANT de tenter d’installer ou d’utiliser ce produit, il est important
que vous lisiez soigneusement le manuel d’instructions. Ce dernier
contient des informations détaillées et des directives permettant
d’installer l’unité et d’en comprendre toutes les capacités. Observez
toutes les règlementations électriques locales et nationales, et
installez l’unité conformément aux règles en vigueur dans votre
région. Toute utilisation ou application de ce produit à d’autres
fins que celles d’origine est entièrement interdite. Si vous avez des
questions, n’hésitez pas à nous contacter:
Dutch Lighting Innovations,
Kraaiendonk 22, 5428 NZ Venhorst, The Netherlands
The DLM-4 Zone Controller is specially designed to set up a Daily
Lighting Management system for your Dutch Lighting Innovations
fixtures. The controller is equipped with an easy to use menu system
in six languages (English, Spanish, German, Dutch, French and
Mandarin).
The DLM-4 Zone Controller can be connected to up to 4 separate
zones of DLI lighting fixtures. Each zone can control up to 255 lights
and 1 sensor, so in total you can control 1020 lights and 4 sensors.
Once connected to the HIDs, the controller will monitor and control
(Turn ON and OFF) the lights using a digital timeclock. Up to (4)
separate temperature sensors can be connected that will measure the
temperature of up to (4) zones / growing areas. The user can select to
dim the lights if the temperature goes above their chosen setpoint, or
to turn the lights off.
1. Introduction
2. Facts
3. Components
4. Installing the DLM-4 Zone Controller
5. Determining the Zones
6. Connections
7. Set-up and using your DLM-4 Zone Controller
7.1 Start Settings
7.2 Configuration page
7.3 Main menu page
7.4 Zone setting page(s)
7.5 Zone status page
7.6 Temperature Min-Max
7.7 Manual OverRide (Force) page
7.8 To manually OverRide / Force a Zone:
7.9 Factory Reset
7.10 Firmware update page
7.11 Messages / Data Log
7.12 Power monitoring
7.13 Hot-start prevention
7.14 Dimming and high-temperature shut down
8. General Information
8.1 Warranty
8.2 Registration
9. Troubleshooting 03
04
05
06
07
09
12
13
14
15
16
18
19
20
21
22
24
27
27
28
29
30
30
31
32
Daily Lighting Management
DLM-4 Zone
BAck enter
Welcome to
Daily Lighting
Management
Press "Menu" to
configure your
DLM-4 Zone
Controller
Daily Lighting Management
DLM-4 Zone
BAck enter
01/19/17
Zone 1
1000W
Zone 2
Restrike
Zone 3
Restrike
Zone 4
Restrike
1000W 70.7F
1000W Day
---.--F
14.31
---.-F
14:31
---.-F
14:31