DLI DLM-4 ZONE, Руководство пользователя

Страница: 8 / 19

DLM-4 ZONE DLM-4 ZONE
Controller Controller
14 15
7.3 Main Menu Page 7.2 Configuration Page
The DLM-4 Zone Controller unit has several configuration settings
that can be customized by the user, those settings are stored in
the Configuration page. Below is a description of the Configuration
settings.
Temperature: Select whether to display F or C for temperature
measurements
Time Format: Select between 12 hour (am/pm) or 24 hour mode
Date Format: Select between USA date display (month-day-year) or
International date display (day-month-year)
Current Time: The user can set the current time.
Current Date: The user can set the current date.
To change Configuration settings:
After DLM-4 Zone Controller configuration is complete, press the
“Back” button to return to main menu.
Press the Menu button and then scroll down the Configuration
page, press Enter to access the Configuration page.
Once the Configuration page is displayed, use the Up and Down
buttons to navigate to the desired setting.
Press Enter to highlight the desired setting.
Use the Up and Down buttons to adjust the line item to your
desired setting.
Pressing Enter will accept the change.
After Configuration is complete, pressing the Back button will
return to the Main Menu 1
2
3
4
5
6
From the Main menu, all of the other pages can be selected. You will
see that there are (4) separate pages for each lighting “zone” settings.
There is also the “OverRide” page, (to manually bypass / force each
lighting zone On or Off) and finally a “System Setup” page to access
the firmware and factory reset.
*NOTE:
Each zone has separate settings, but the steps required to
make changes to the settings are the same for each zone.
Main Menu
Zone 1
Zone 2
Zone 3
Zone 4
Override
Configuration
System Setup
Configuration
Output Unit
Temperature
Time Format
Date Format
Time
Date
W
F
12h
USA
03:48:56pm
03/08/2017