DK2 OPC514, Инструкция по сборке

Страница: 34 / 96

34 | OPC514 man. v.210412
ENGLISH
CHIPPING
IMPORTANT NOTES
THIS CHIPPER WAS DESIGNED FOR CHIPPING 4” DIAMETER AND SMALLER TREES AND
BRANCHES. NEVER USE THIS MACHINE FOR ANY OTHER PURPOSE AS IT COULD CAUSE
SERIOUS INJURY.
PROCESSING 4” OR SMALLER TREES & BRANCHES
• Your chipper can process dry or green material.
• Feed branch into chipper hopper.
• Keep branch at same angle as chipper hopper.
• As the branch becomes short and is inside the chipper hopper, finish processing it by
pushing it into the chipper with the next branch if needed.
• If branches are 2” or larger in diameter, feed only one branch at a time into the chipper.
• If branches are smaller than 2”, more than one at a time can be fed into the chipper.
• Green branches process easier than hard wood.
• Make sure protective gloves are worn when feeding the chipper.
CHIPPING NOTES
• Use common sense when using your chipper.
• Learn to recognize the change in the sound of your machine when it is overloaded.
• Become familiar with successful operating conditions and avoid those that can overload and
damage the machine.
• If the machine becomes jammed by overloading or any other cause, stop the machine
immediately.
• If you jam the machine and do not stop the engine it can:
• Burn the belt
• Ruin the clutch
THIS DAMAGE CAN BE COSTLY AND IT IS NOT COVERED UNDER WARRANTY. FOR THIS
REASON, IT IS IMPORTANT THAT YOU IMMEDIATELY SHUT OFF THE MACHINE IF IT
BECOMES JAMMED.
• Only your operator experience will tell you how fast to feed trees and branches.
• Check to see that the flywheel will turn freely before you start the chipper.
• Visually check the chipper blade for damage each time you use your chipper.
• Check blade condition, wear plate condition, and the nuts and bolts that hold the blade in
place for tightness before each use.
• To move pile of processed material, use a spade, rake, or long handle tool. Never use your
hands or feet.