DK2 OPC514, Инструкция по сборке

Страница: 10 / 96

10 | OPC514 man. v.210412
ENGLISH
SAFETY
SAFE OPERATION PRACTICES
• Keep all guards and safety devices in place and operating properly. Do not operate the
machine if all safety guards are not in place.
• Do not use the unit with the chipper hopper removed.
• The muffler and engine become hot and can cause a severe burn. Do not touch.
• Keep children and pets away.
• Tragic accidents can occur if the operator is not alert to the presence of small children.
• Keep children out of the work area and under the watchful eye of a responsible adult
other than the operator.
• Be alert and turn the unit off if a child enters the area.
• Never allow children to operate the chipper.
• Do not overload or attempt to chip material beyond 4 inches.
Personal injury or damage to the machine could result.
• Never operate the machine at high transport speeds or on hard or slippery surfaces.
• Never allow bystanders near the unit while running.
• Only use accessories approved for this machine by the manufacturer. Read, understand, and
follow all the instructions provided with the approved accessory.
• Only operate unit in good daylight. Do not operate unit at night or in dark areas where your
vision may be impaired.
• Use extreme caution when reversing or pulling the machine towards you. NEVER move the
machine while it is running.
• Do not tamper with the engine’s governor setting. The governor controls the maximum safe
operation speed and protects the engine. Over-speeding the engine is dangerous and will
cause damage to the engine and to the other moving parts of the machine.
• Start the engine according to the manufacturers instructions. Keep hands and feet away from
inlet and discharge areas.
• Never pick up or carry the machine while the engine is running.
• Do not operate while under the use of alcohol, drugs, or medication. A clear mind is
essential for safety.
• Do not allow anyone who is not alert to operate this machine.
• When feeding material into this equipment, be extremely careful that pieces of metal, rocks,
or other foreign objects are not included. Personal injury or damage to the machine could
result.
• Keep area of discharge clear of people, animals, buildings, glass or anything else that will
obstruct clear discharge, cause injury or damage. Wind can also change discharge direction,
so be aware.
• Do not allow an accumulation of processed material to build up in the discharge area as this
will prevent proper discharge and can result in kick-back from the chipper chute.
• Do not allow any part of the engine, especially around the cooling fins and muffler, to
become clogged with processed material, leaves, oil, grease or any other combustible
material.
• Do not operate engine if air cleaner or cover over carburetor air-intake is removed, except
for adjustment. Non-Removal of such parts could create a fire hazard.