DK2 OPC514, Инструкция по сборке

Страница: 8 / 96

8 | OPC514 man. v.210412
ENGLISH
SAFETY
SAFE OPERATION PRACTICES
TRAINING
• Read this owner’s manual carefully in its entirety before attempting to assemble this
machine. Read, understand and follow all instructions on the machine before operation. Be
completely familiar with the controls and the proper use of the machine before operating
it. Keep this manual in a safe place for future and regular reference and for ordering
replacement parts.
• Never allow children to operate the unit. Never operate the equipment without proper
instruction. Only responsible individuals who are familiar with these rules of safe operation
should be allowed to use this unit.
• Keep the area of operation clear of all persons, particularily small children and pets. Stop the
engine when they are in the vicinity of the unit. Keep work area clean and clear of branches
and obstacles, which could cause you to stumble or fall.
• Keep in mind that the operator or user is responsible for accidents or hazards occurring to
other people, their property, and themselves.
• Your chipper is a powerful tool, not a plaything. Exercise extreme caution at all times. Your
unit has been designed to chip wood. Do not use it for any other purpose.
• If situations occur which are not covered in this manual, use care and good judgment.
PREPARATION
• Thoroughly inspect the area where the equipment is to be used and remove all foreign
objects.
• Do not operate the machine without wearing adequate protection and safety goggles.
Always wear safety glasses or goggles during operation and while performing any
adjustment or repair, to protect eyes from foreign objects that may be thrown from the
machine. Be sure your glasses or goggles fit properly.
• Avoid loose-fitting clothes and use protective footwear that will improve footing on
slippery surfaces. Shirt and slacks that cover the arms and legs and steel-toed boots are
recommended. Secure hair above shoulders. Do not wear loose clothes or jewelry that can
be caught in moving parts. Never operate the unit in bare feet, sandals, or sneakers. Wear
gloves when feeding the material into the chipper chute. Be sure your gloves fit properly.
WARNING: Fuel is highly flammable and the vapors are explosive. Take the following
precautions.
• Store fuel and oil in approved containers.
• Keep away from heat and open flame, and out of reach from children.
• Refuel outdoors only and do not smoke while refueling.