DK2 OPC514, Инструкция по сборке

Страница: 11 / 96

OPC514 man. v.210412 | 11
ENGLISH
SAFETY
SAFE OPERATION PRACTICES
TOWING
• Obey all state and local regulations when towing on public roads. THIS MACHINE IS NOT
HIGHWAY TOWABLE.
• Before towing, be certain the chipper is correctly and securely attached to the towing
vehicle and the safety chains are in place. Leave slack in the chains to allow for turning.
• Do not allow anyone to sit or ride on the chipper. This can cause serious injury.
• Stay alert for hidden hazards or traffic. Do not carry passengers.
• Never carry any cargo or wood on your chipper. It may fall off and endanger following
vehicles.
• Allow for added length when turning, parking, crossing intersections and in all driving
situations.
• Be careful when backing up. You can easily jackknife your chipper.
• Adjust towing speed for terrain and conditions. Do not exceed 45 MPH when towing.
• Because there is no suspension on the chipper, it will tend to bounce more on rough roads.
Be extra cautious when towing over bumpy or rough terrain including railroad crossings.
MAINTENANCE & STORAGE
• Keep machine, attachments and accessories in safe working condition.
• Check engine mounting bolts and other hardware before each use for proper tightness.
Never operate your chipper in poor mechanical condition or when in need of repair. Be
sure all safety guards and shields are in proper position. These safety devices are for your
protection.
• Never store machine with fuel in the fuel tank inside a building where ignition sources are
present, such as hot water and space heaters, clothes dryers and the like. Allow the engine
to cool before storing in any enclosure.
• Always refer to the operator’s manual for important details if the machine is to be stored for
an extended period.
• If the fuel tank is to be drained, do this outdoors.
• If it is necessary for any reason to unclog the feed intake or discharge openings or to inspect
or repair the machine where a moving part can come in contact with your body or clothing,
shut the machine off, allow all moving parts to come to a complete stop, disconnect the
spark plug wire(s) and allow the engine to cool before attempting to unclog, inspect or
repair.
• Check the blade mounting screws before each use for proper tightness. Also visually inspect
the blade for wear or damage. Replace the blade with parts that meet original equipment
specifications.