DK2 OPC514 Скачать руководство пользователя страница 48

Страница: 48 / 96

48 | OPC514 man. v.210412

ENGLISH

PLEASE DO NOT RETURN TO THE STORE

CALL US AT 702-331-5353 FOR OEM WARRANTY PARTS AND QUESTIONS

WHAT IS COVERED - 3YR ENGINE AND 1 YEAR COMMERCIAL WARRANTY INCLUDED

Detail K2 Inc. warrants to the original purchaser that model OPC514 will be free and clear of manufacturing defects

in workmanship and materials under normal use and service for a period of one (1) year from the date of the original

purchase. If one (1) year from the original date of purchase this OPC514 fails due to defect in material or 1-year parts

only warranty no labor. Kohler 3 year warranty is PARTS and LABOR.

Upon expiry of one (1) year, Detail K2 will no further liability to the product. Detail K2 does not authorize any party,

including its authorized distributors or dealers, to offer any other warranty on behalf of Detail K2 Inc.
SERIAL NUMBERS MUST BE REGISTERED ONLINE AT WWW.DK2POWER.COM, WARRANTY NON-

TRANSFERABLE.
KOHLER ENGINES - KOHLER CH SERIES ENGINES COMMERCIAL 3 YR PARTS AND LABOR WARRANTY

KOHLER ENGINES - KOHLER SH SERIES ENGINES RESIDENTIAL 2 YR PARTS AND LABOR WARRANTY

See your Kohler manual for specific warranty.

DK2 OPC514 - 1-Year parts only, no labor. 3-year commercial Kohler warranty.

THIS WARRANTY DOES NOT COVER OR APPLY TO:

(a) Damage to the product due to misuse, mishandling and abuse

(b) Improper installation, maintenance and storage

fittings, cutting teeth, cutting chains, cutting blades, throttles, belts and tires.

(d) Normal wear and tear

(e) Consequential damage & incidental damages such as damage to persons or property

PROCEDURE FOR OUTDOOR POWER EQUIPMENT WARRANTY

Within one (1) year warranty period, the purchaser of the product can CALL 702-331-5353 DK2 POWER or contact

us on www.DK2Power.com Notify us of the claimed defect and provide proof of original purchase. At this time the

validity of the claim will be determined, and if approved replacement parts will be issued. No returned product will

be accepted under warranty unless accompanied by an RGA# issued by Detail K2 Inc.

DAMAGED FREIGHT

Damage to your product caused by freight mishandling is NOT covered under warranty. If your freight arrives

damaged, REFUSE it. Inspect your product when it arrives, otherwise if you accept it, you will be responsible for

filing any freight claims with the delivery company. DK2 warranty excludes damage to product.

RETURNS BEFORE GAS AND OIL

Follow the return policy from the retailer you purchased the equipment from.

RESOLUTION FOR A DEFECTIVE PRODUCT AFTER GAS AND OIL HAS BEEN ADDED

Call DK2Power at 702-331-5353 in Las Vegas between 8 AM - 4 PM M-F Pacific Time.

WARRANTY

3 YEAR ENGINE & 1 YEAR CHASSIS

Содержание OPC514

































































































Результаты поиска

Содержание OPC514

Отзывы:

Похожие инструкции для OPC514

Бренды по названию

Популярные бренды

DK2 OPC514, Инструкция по сборке

Результаты поиска

Содержание OPC514

Отзывы:

Похожие инструкции для OPC514

Бренды по названию

Популярные бренды