DK-Technologies PT5300, Руководство по установке и эксплуатации

Страница: 85 / 90

PT5300 | 79
:OUTPut:LTCG1:FORMAT
’2997DROPF’,’AUTO’,23,30;
Sets the format to 29.97 frames per second, drop frame. The frames counter will reset at 23:30, automatically.
:OUTPut:LTCG1:OFFSET
:OUTPut:LTCG2:OFFSET
Offsets the LTC generator ± 0.5 seconds relative to the absolute GPS time. Time is in nano seconds.
example:
:OUTPut:LTCG2:OFFSET 3000;
Sets the LTC generator to have frame 0 start 3 micro seconds before the GPS time seconds.
:OUTPut:LTCG2:OFFSET?;
response: 3000
6.5 Communication Error Codes
6.5.1 Command Errors [-199, -100]
Error
Number
Error string
[description/explanation/example]
-100
Command error.
The command is invalid or incorrect.
-101 Invalid character.
A command or parameter contains an invalid character, e.g. a header containing an
ampersand, SYST:VERS&
-102
Syntax error.
An unrecognized command or datatype was encountered,
e.g. a string was received when the generator did not accept strings.
-103 Invalid separator.
A separator was expected, but an illegal character was encountered, e.g. the
semicolon was omitted after a command,*IDN?:SYST:ERR?;
-104
Data type error.
A data element different than one allowed was encountered,
e.g. numeric data was expected but string data was encountered.
-108 Parameter not allowed.
More parameters were received than expected for the command, e.g. the *IDN?;
command accepts no parameters, so receiving *IDN? 2; is not allowed.
-109 Missing parameter.
Fewer parameters were received than expected for the command, e.g.
OUTP:BB1:DEL2,2; is missing one parameter.
-110
Command header error.
An error was detected in the command header.
-111 Header separator error.
A character which is not a legal header separator was encountered, e.g. no white space
followed the header, thus
SYST:PRES:NAME“MACRO” is an error.
-112 Program mnemonic too long.
The header contains more than twelve characters.
-113
Undefined header.
The header is syntactically correct, but is not defined for the device.