44
| PT5300
To change the timing of the CLICK in the LIP sync signal:
2NDMNU:../HD1/AUDIO, select
2NDMNU:<CLICK OFFSET> ...
2NDMNU:./AUDIO CLICK OFFSET, select
E
OFFSET: +1ns <SAVE> ESC
Operation:
• Use the
and
buttons to select CLICK OFFSET. Change of OFFSET CLICK is instantaneous, i.e. any
change is reflected immediately in the output signal.
• When the desired group appears in the display, move the cursor to SAVE and press E. If no change is
desired, move the cursor to ESC and press
.
Leaving the function takes you back to the ../HD1/AUDIO, select 2ndmenu.
To change the delay/advance timing for the HD-SIGNAL output, select TIMING.
Operation:
2NDMNU:../HD1/TIMING, edit delay
F:< 0> H:000 T:-00123.4 SAVE ESC
• Use the and buttons to select F, H, or T
• Then use the
and
buttons to change the setting. Changes to the timing are instantaneous, i.e. any
changes are reflected immediately in the output signal.
• When the desired setting appears in the display, move the cursor to SAVE and press E to change the setting.
The timing can be adjusted by coarse or fine adjustment parameters. The coarsest adjustment is field (F), the finest is
time (T), and line (H) is in between. The T value is in nanoseconds, with a resolution of approximately 6.7 ns.
• The T value can be changed by using the and
buttons to adjust the smallest step for the adjustment but
a faster method is to press E when the cursor is on the T value. This opens an editor in which each of the
digits can be changed using the
and
buttons with resolution of 6.7 ns.
• Positions are selected by using the
and
buttons.
• To exit the editor, press E.
• When the desired delay setting appears in the display, move the cursor to SAVE and press E
• If no changes are desired, move the cursor to ESC and press .
Leaving the function takes you back to the HD-SDI/HD1 submenu.
Содержание PT5300
Страница 6: ......
Страница 59: ...PT5300 53 4 9 Menu Tree Figure 7 PT5300 Menu tree ...
